Access Point Mode - TP-Link WR841HPV5 User Manual

Chapter 2
3 ) After successful login, click
and follow the step-by-step instructions to complete the initial configuration.
6. Relocate: Place the router between your host router and the Wi-Fi dead zone. The
location you choose must be within the range of your existing host network.
Host Router
7. Enjoy! The extended network shares the same SSID (Network Name) and password
as your host network.
2. 2. 4.

Access Point Mode

This mode transforms your existing wired network to a wireless network.
Internet Ethernet1 Ethernet2 Ethernet3
Ethernet1 Ethernet2
Wired Host Router
1. Turn on the router.
2. Connect the router to your wired host router's Ethernet port via an Ethernet cable as
shown above.
3. Connect a computer to the router via an Ethernet cable or wirelessly by using the
SSID (network name) and password printed on the bottom label of the router.
4. Enter http://tplinkwifi.net
you want to use and then use
Login.
Next to start the Quick Setup. Select
Host Network
High Power Router
Ethernet4
Ethernet3 Ethernet4
High Power Router
in the address bar of a web browser. Select the language
admin
Extended Network
for both username and password. Then click
Connect to the Internet
Wireless Router
Client
Client
12