Table of Contents
Advertisement
Chapter 6
•
Enable WMM
- WMM function can guarantee the packets with high-priority messages
being transmitted preferentially. It is strongly recommended to enable this function.
•
Enable Short GI
- It is recommended to enable this function, for it will increase the
data capacity by reducing the guard interval time.
•
Enable AP Isolation
wireless stations cannot access each other through WLAN. This function will be
disabled if WDS/Bridge is enabled.
6. 4. 5.
Wireless Statistics
1. Visit http://tplinkwifi.net, and log in with the default username and password:admin.
2. Go to
Wireless
>
Wireless Statistics
each client device connected to the router.
•
MAC Address
- The MAC address of the connected wireless client.
•
Current Status
- The running status of the connected wireless client.
•
Received Packets
- Packets received by the wireless client.
•
Sent Packets
- Packets sent by the wireless client.
•
Configure
- The button is used for loading the item to the Wireless MAC Filtering list.
•
Allow
- If the Wireless MAC Filtering function is enabled, click this button to
allow the client to access your network.
•
Deny
- If the Wireless MAC Filtering function is enabled, click this button to
deny the client to access your network.
6. 4. 6.
Throughput Monitor
1. Visit http://tplinkwifi.net, and log in with the default username and password:admin.
2. Go to
Wireless
>
Throughput Monitor
- This function isolates all connected wireless stations so that
to check the data packets sent and received by
to view the wireless throughput information.
Configure the Router in Repeater Mode
100
Advertisement
Table of Contents
