Table of Contents
Advertisement
Chapter 4
Configure the Router in Standard Wireless Router
4. 16. 7. Reboot
1. Visit http://tplinkwifi.net, and log in with the default username and password: admin.
2. Go to
System Tools
> Reboot, and you can restart your router.
Some settings of the router will take effect only after rebooting, including:
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Working Modes.
• Change the Web Management Port.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router to its factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).
4. 16. 8. Password
1. Visit http://tplinkwifi.net, and log in with the default username and password: admin.
2. Go to
System Tools
> Password, and you can change the factory default username
and password of the router.
It is strongly recommended that you change the default username and password of the
router, for all users that try to access the router's web-based utility or Quick Setup will
be prompted for the router's username and password.
69
Advertisement
Table of Contents
