Table of Contents
Advertisement
Chapter 2
2. 2. 2.
Router mode
This mode enables multiple users to share internet connection via ADSL/Cable Modem.
1. Follow the steps below to connect your router.
If your internet connection is through an Ethernet cable from the wall instead of through
a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the router's
WAN port, and then follow Step 4 and 5 to complete the hardware connection.
1
3
1 ) Turn off the modem, and remove the backup battery if it has one.
2 ) Connect the modem to the WAN port on your router with an Ethernet cable.
3 ) Turn on the modem, and then wait about 2 minutes for it to restart.
4 ) Connect the power adapter to the router and turn on the router.
5 ) Verify that the hardware connection is correct by checking these LEDs.
Tips: If Wi-Fi LED is off, press and hold the Wi-Fi On/Off button until it is on.
2. Connect your computer to the router.
• Method 1: Wired
Turn off the Wi-Fi on your computer and connect the devices as shown below.
• Method 2: Wirelessly
Modem
2
RE
Wi-Fi
PWR
WAN
ON
ON
ON
Ethernet cable
Connect to the Internet
4
LAN
WPS
Router
8
Advertisement
Table of Contents
