Table of Contents
Advertisement
Chapter 4
•
MAC Address
- The physical address of the LAN ports. The value can not be changed.
•
IP Address
- Enter the IP address in dotted-decimal notation of your router (factory
default - 192.168.0.254).
•
Subnet Mask
- An address code that determines the size of the network. Normally
255.255.255.0 is used as the subnet mask.
Note:
• If you have changed the IP address, you must use the new IP address to log in.
• If the new IP address you set is not in the same subnet as the old one, the IP address pool in the DHCP
Server will be configured automatically, but the Virtual Server and DMZ Host will not take effect until they
are re-configured.
4. 3. 3.
IPTV
1. Visit http://tplinkwifi.net, and log in with the default username and password: admin.
2. Go to
Network
> IPTV.
•
IGMP Snooping
- IGMP snooping is designed to prevent hosts on a local network from
receiving traffic for a multicast group they have not explicitly joined. IGMP snooping
is especially useful for bandwidth-intensive IP multicast applications such as IPTV.
•
IGMP Proxy
- Select to enable IGMP Proxy.
Configure the Router in Standard Wireless Router
27
Advertisement
Table of Contents
