Table of Contents
Advertisement
Chapter 4
Done!
4. 4. 5.
Wireless Advanced
1. Visit http://tplinkwifi.net, and log in with the default username and password: admin.
2. Go to
Wireless
>
Wireless
3. Configure the advanced settings of your wireless network and click Save.
Note:
If you are not familiar with the setting items on this page, it's strongly recommended to keep the provided default values;
otherwise it may result in lower wireless network performance.
4. Select
Allow the stations specified by any enabled entries in
the list to access
5. Delete or disable all entries if there are any entries already.
6. Click
Add New
and fill in the blanks.
1 ) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-
00-07-5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Leave the status as Enabled.
4 ) Click
Save
and click Back.
7. The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.
Advanced.
Configure the Router in Standard Wireless Router
as the filtering rule.
34
Advertisement
Table of Contents
