Access Point Mode - TP-Link TL-WR940N User Manual

Chapter 2
Note: If the above screen does not appear, please refer to
4. After successful login, select
configuration.
Tips: Click Survey to choose your host network and fill in its wireless password.
5. Relocate: Place the router between your host router and the Wi-Fi dead zone. The location
you choose must be within the range of your existing host network.
Host Router
6. Enjoy! The extended network shares the same SSID (wireless name) and password as your
host network.
2. 2. 3.

Access Point Mode

This mode transforms your existing wired network to a wireless network.
Internet Ethernet1 Ethernet2 Ethernet3
Ethernet1 Ethernet2
Wired Host Router
1. Connect the power adapter to the router and turn on the router.
2. Connect the router to your wired host router's Ethernet port via an Ethernet cable as shown
above.
3. Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID
(Network Name) and password printed on the label at the bottom of the router.
Repeater
Host Network
Range Extender
Ethernet4
Ethernet3
FAQ > Q3.
mode and follow Quick Setup
Extended Network
Internet
Access Point
Connect to the Internet
to complete the
Client
Client
10