Stacking Bandwidth - D-Link DGS-3130 Series Web Ui Reference Manual

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured in Stack ID are described below:
Parameter
Current Unit ID
New Box ID
Priority
Click the Apply button to accept the changes made.

Stacking Bandwidth

This window is used to display and configure the stacking bandwidth settings. Physical stacking needs to be enabled
and can be configured to support either a 2-port or a 4-port stacking configuration.
• When the 2-port-SFP+ or 2-port-10GBaseT stacking configuration is used, a full-duplex speed of up to
40Gbps will be used between two Switches.
 The DGS-3130-30TS/30S/30PS will use physical ports 25 and 26 for 2-port stacking.
 The DGS-3130-30TS/30S/30PS will use physical ports 29 and 30 for 2-port stacking.
 The DGS-3130-54TS/54S/54PS will use physical ports 49 and 50 for 2-port stacking.
 The DGS-3130-54TS/54S/54PS will use physical ports 53 and 54 for 2-port stacking.
• When the 4-port-SFP+ or 4-port-Hybrid stacking configuration is used, a full-duplex speed of up to 80Gbps will
be used between two Switches using four physical ports aggregated into two virtual stacking ports.
 The DGS-3130-30TS/30S/30PS will use physical ports 25, 26, 29, and 30 for 4-port stacking.
 The DGS-3130-30TS/30S/30PS will use physical ports 27, 28, 29, and 30 for 4-port stacking.
 The DGS-3130-54TS/54S/54PS will use physical ports 49, 50, 53, and 54 for 4-port stacking.
 The DGS-3130-54TS/54S/54PS will use physical ports 51, 52, 53, and 54 for 4-port stacking.
NOTE: The stacking bandwidth must be configured before the Switch is stacked with other
Switches.
To view the following window, click Management > Stacking > Stacking Bandwidth, as shown below:
The fields that can be configured are described below:
Parameter
Stack Bandwidth
Description
Select the unit ID of the Switch in the stack.
Select the new box ID for the Switch that is selected in the Current Unit ID
field. The user may choose any number between 1 and 9 to identify the Switch
in the switch stack. Auto will automatically assign a box number to the Switch
in the Switch stack.
Enter the priority of the Switch stacking unit. The range is from 0 to 15.
Figure 4-631 Stacking Bandwidth Window
Description
Select the stacking bandwidth here. Option to choose from are:
• 2-port-10GBaseT - Specifies 2 10GBase-T switch ports to be used for
stacking.
• 2-port-SFP+ - Specifies 2 SFP+ switch ports to be used for stacking.
• 4-port-Hybrid - Specifies 2 10GBase-T and 2 SFP+ switch ports to be
used for stacking.
83