Port Rate Limiting - D-Link DGS-3130 Series Web Ui Reference Manual

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Queue ID
Click the Apply button to accept the changes made.

Port Rate Limiting

This window is used to display and configure the port rate limiting settings.
To view the following window, click QoS > Basic Settings > Port Rate Limiting, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port - To Port
Direction
Rate Limit
Figure 7-4 CoS to Queue Mapping Window
Description
Select the queue ID that will be mapped to the corresponding CoS value.
Options to choose from are 0 to 7.
Figure 7-5 Port Rate Limiting Window
Description
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Select the direction option here. Options to choose from are Input and Output.
When Input is selected, the rate limit for ingress packets is configured. When
Output is selected, the rate limit for egress packets is configured.
Select and enter the rate limit value here.
251