Pulse Quad Combo Input Mk Ii - Barco UDX User Manual

LED
LIGHT (Illumination LED)
ERR (error LED)
IR

4.6 Pulse Quad Combo input Mk II

Overview Quad Combo Input Mk II
SDI IN
3G/12G SEL 3G
SEL
SYNC SYNC
A B
1 2
Image 4–6
1 Quad SDI channel A: 3G/12G input
2 Quad SDI channel B: 3G input
3 Quad SDI channel C: 3G SDI input + 3G/12G output
4 Quad SDI channel D: 3G SDI input / output
Functionality of the Quad Combo input Mk II
The Quad Combo Input Mk II support 12G input and throughput on the SDI connectors.
Compared with the Mk I the Mk II includes the following:
• SDI input A supports 12G input signals.
• SDI input C functions as a loop-through output for any signal placed on input A.
• SDI input D functions as a loop-through output for any signal placed on input B.
• HDBaseT input 1 supports network connectivity.
CAUTION: Ethernet should only be connected to either the 10/100 base-T port (on the
communication panel) or the HDBaseT input (on the Quad Combo Input Mk II). Using both at the
same time will lead to undefined behavior.
SDI input & output – How does it work?
When connecting an SDI source to the projector and the signal is HD or 3G, you can choose any of the four
input connectors.
When connecting multiple projectors with the same signal, you can connect the signal as follows:
• Connect the source signal to Input A or B of the first projector.
• If the source signal is connected to input A, connect input/output C to the Input of the following projector.
• If the source signal is connected to input B, connect input/output D to the Input of the following projector.
• Continue in the same fashion until all projectors are connected.
When connecting a 12G SDI source to the projector, you can only connect that source to input A.
Color status
GREEN
Off
RED
ORANGE
GREEN
GREEN-ORANGE
Off
RED toggles on/off
ORANGE toggles on/off
RED
GREEN
SDI IN/OUT
3G 3G SEL
SEL
SYNC SYNC
C D
3 4
Input & Communication
Description
Projector is on
Light source is off
No light source detected
Light source is on in ECO mode
Light source is on in normal mode
Light source is on in CLO mode
No error
Error
Warning
IR signal received
IR signal acknowledged
SEL SEL
DP SYNC HDMI SYNC HDBT 1
5 6 7
5 DisplayPort Input
6 HDMI input
7 HDBaseT input 1
8 HDBaseT input 2
SEL
SEL
SYNC SYNC
HDBT 2
8
R5906112 /12 UDX 43