Canon EOS-1V HS Instructions Manual page 99

C.Fn-2 Film leader position
When the film rewind is completed, you can leave out the film leader.
C.Fn Function
C.Fn-2 Film leader position
C.Fn-2-1: This is convenient if you develop your own film.
With C.Fn-2-1 set, the shutter speed will always be 1/8000 sec. when you
release the shutter with the camera back open.
DX-coded film speed setting method
C.Fn-3
This can prevent the camera from automatically setting the ISO film speed.
C.Fn Function
Automatic setting of
C.Fn-3
DX-coded film speed
C.Fn-3-1: This enables you to set the film speed manually. (→p.73) This
ensures that the desired film speed is set. You need not
keep setting the film speed manually each time you load the
film.
Custom Function Settings
No.
Rewinds film leader into the
0
cartridge.
Leaves film leader outside the
1
cartridge.
No.
0 Enabled
1 Disabled
Description
Description
99