When you select spot metering, it will be linked to the selected focusing point.
(→p.52)
With C.Fn-18, you can select the center focusing point by pressing (and
C.Fn
releasing) or holding down the <
The manual selection method can be altered as follows:
C.Fn
(1) C.Fn-11-1 gives the <
(→p.105)
(2) C.Fn-11-2 gives the <
(3) C.Fn-11-2 can switch manual focusing point selection to automatic
selection. (→p.105)
(4) C.Fn-11-3 gives the <
Selecting the center focusing
point
• Press the <
<
> button.
The center focusing point will be
selected.
> button. (→p.109)
> button the function of the <
> button the function of the <
<
> dial can also be used
by itself. (→p.105)
> button the function of the <
Focusing Point Selection
> button and press the
> button.
> button. The
> button.
41