Canon EOS-1V HS Instructions Manual page 43

• A focusing point can be registered even when C.Fn-13-1/2 has been set to limit
the selectable focusing points to 11. (→p.106)
• When C.Fn-13-3 has been used to limit the selectable focusing points to 9, a
focusing point cannot be registered. (→p.106)
• "SEL" stands for Select, and "HP" stands for "Home Position."
Switching to the Registered Focusing Point
Normally, you press the <
switch to the registered focusing point. However, with C.Fn-18-1/2
(→p.109), you can just press the <
focusing point. See "Setting Custom Functions" on page 96.
If no focusing point has been registered, the above steps will switch it to the
center focusing point.
If C.Fn-18-1/2 and C.Fn-4-1/3 have been set, you can press only the <
switch to the registered focusing point and start autofocusing at the same time.
Focusing Point Registration and Switching
> button and <
> button to switch to the registered
(1) Press the <
button simultaneously.
• This is the default method with C.Fn-
18-0.
(2) Press only the <
switch to the registered focusing
point.
C.Fn-18-1
(3) Switch to the registered focusing
point only while pressing the
< >.
C.Fn-18-2
• When the <
return to the original focusing point.
> button simultaneously to
> button and <
> button to
(→109)
(→109)
> is released, it will
>
> to
43