Manual Focusing - Canon EOS-1V HS Instructions Manual

When Autofocus Fails (Manual Focusing)

Manual Focusing

• Select the desired focusing point and press the shutter button halfway while
manual focusing. When focus is achieved, the selected focusing point will flash
and the in-focus indicator will light.
• When the focusing point is selected automatically and the center focusing point
achieves focus, it will flash and the in-focus indicator will light.
• With USM (Ultrasonic Motor) lenses (except those not having a distance
scale), you can use the focusing ring to fine focus after focus is achieved in the
One-Shot AF mode (full-time manual focusing).
For USM lenses with an electronic focusing ring (such as the EF 200mm
C.Fn
f/1.8L), Custom Function C.Fn-7 can require the lens focus mode switch to be
set to MF (or M) before manual focus is enabled. (→p.102)
48
1 Set the lens focus mode switch to
MF (or M on older lenses).
• The AF mode indicator on the LCD
panel turns off.
2 Focus by turning the lens
focusing ring until the subject is
in focus in the viewfinder.