Setting The Film Speed Manually - Canon EOS-1V HS Instructions Manual

Setting the Film Speed Manually

If the film is not DX-coded or if you want to set a different ISO film speed,
you can load the film and set the ISO film speed manually.
• The ISO film speed can be set manually from 6 to 6400.
Difference Manually-set
relative to the ISO film speed
correct ISO film
speed
This sample display indicates
that ISO 400 film has been
manually set to ISO 800. This
is also displayed when the
film starts rewinding and until
the film cartridge is taken out.
The manually-set film speed will be canceled the next time DX-coded film is
loaded.
C.Fn-3 can prevent the manually-set film speed from being canceled the next
C.Fn
time DX-coded film is loaded. (→p.99)
1 Press and hold down the <
button and <
simultaneously.
The icon and the currently-set film
speed will be displayed.
2
Turn the <
desired film speed is displayed on
the LCD panel.
• With DX-coded film, the difference in
stops relative to the correct ISO
speed is displayed.
3
Release the two buttons.
The film speed will then be set.
> button
> dial until the
>
73