Canon EOS-1V HS Instructions Manual page 135

Metering range ................EV 0-20 for all metering modes (at 20˚C with 50mm f/1.4 lens,
ISO film speed range.......ISO 6-6400 (Set automatically with DX-coded film at ISO 25-
Exposure compensation......(1) Autoexposure bracketing (AEB): ±3 stops in 1/3-stop
AE Lock ...........................(1) Auto AE lock: Operates in One-Shot AF mode with evaluative
Multiple exposures ..........Max. 9 multiple exposures per frame (Cancelable and resettable
• Autofocus
Type ................................TTL-AREA-SIR with a CMOS sensor
Focusing points ...............Area AF with 45 focusing points
AF working range ............EV 0-18 (at ISO 100)
Focusing modes ..............(1) One-Shot AF: Autofocus stops when focus is achieved,
In-focus indicator .............Flashing focusing point in viewfinder (can be disabled with a
Focusing point selection......(1) Automatic selection: Focusing point camera-selected.
Focusing point registration and switching.....Any single focusing point or 45-point automatic selection can be
program flash AE, 8 Manual, 9 Bulb (Safety shift possible for 2
and 3.)
ISO 100)
5000.)
increments.
(2) Manual exposure compensation up to ±3 stops in 1/3-stop
increments set with the Quick Control Dial
AEB and manual exposure compensation can be set together.
metering when focus is achieved.
(2) Manual AE lock: AE lock button activates AE lock in all
metering modes.
at any time.). Cancels automatically after all multiple exposures
are taken.
resulting in AF lock.
(2) AI Servo AF: Tracks subject movement up to the start of
exposure. No in-focus indicator (blinks at 8 Hz only if AF fails).
(3) Manual focusing: Enabled with the focusing ring when the lens
focus mode is set to MF (or M). Electronic manual focusing
during continuous shooting and exposure is enabled with PB-
E2 and NP-E2.
Custom Function), in-focus indicator, and beeper (can be
disabled with the Main Switch).
(2) Manual selection: Focusing point manually-selected.
registered by pressing the Assist button and FE lock button
simultaneously.
Pressing the Assist button and focusing point selector switches to
the registered focusing point.
Major Specifications
135