Setting Exposure Compensation
Custom Function C.Fn-6-2 enables the exposure compensation amount to be
C.Fn
set in 1/2-stop increments. (→p.102)
The exposure compensation amount's 1/2-stop increments enabled with C.Fn-6
are indicated in the viewfinder and on the LCD panel as shown below.
Exposure Compensation with the <
• The exposure compensation amount will remain in effect even after the <
switch is set to <
• To prevent the <
compensation amount, set the <
68
–1 1/2 exposure compensation
2
Press the <
<
desired exposure compensation
amount.
>.
> dial from turning inadvertently and changing the exposure
> switch to <
> Button and <
> button and turn
> dial within (
>.
> Dial
) to set the
6
>