Canon EOS-1V HS Instructions Manual page 23

Be sure to set the user-settable No. before loading the film. The film ID is
imprinted automatically as it advances to frame 1 after loading. You cannot set
the user-settable No. once the film has been loaded. You also cannot set the
film roll No.
User-settable No.
Film roll No.
Imprinting position
: Multi Function. This
refers to the EOS-1V's
extended functions.
User-settable No.
Film roll No.
Frame 1
1 Press the <
film ID setting mode.
• Each time you press the button, the
following icons will be displayed in
turn on the left side of the LCD panel.
Display the
Data transfer icon
The blinking number is the user-
settable No.
• After the film advances to frame 1,
the user-settable No. will be
displayed and it cannot be changed.
2
Turn the <
desired user-settable No.
• You can set any number from
.
• The film roll No. is set sequentially
from
start from
Film ID Imprinting
> button to set the
icon.
ID icon
PF icon
> dial to set the
to . After
again.
to
, it will
23