Checking The Battery Level - Canon EOS-1V HS Instructions Manual

Installing the Battery and Checking the Battery Level

Checking the Battery Level

Check the battery level after replacing the batteries or before using the camera.
Battery Life (No. of Rolls)
Temperature
At 20˚C
At –20˚C
• If the < > is set to <
battery may have been installed incorrectly. Take out the battery and install
correctly. Then check the battery level again.
• Since actual shooting conditions may differ, the actual number of rolls may be
less than the figures in the table.
• Pressing the shutter button halfway for prolonged periods or frequent
autofocusing without taking any pictures will lower the number of rolls that can
be taken.
• When the camera is not to be used, set the <
accidental battery drainage if the shutter button is held down inadvertently.
• The battery level is indicated each time the <
current battery level, turn on the <
20
• The table shows the number of 24-exposure rolls
Rolls
based on Canon's tests with a new battery and an
75 (50)
EF 50mm f/1.4 USM lens. Figures in parentheses
are the number of 36-exposure rolls.
18 (12)
• Information on battery life with Power Drive
Booster PB-E2 or E1 and Battery Pack BP-E1 is
provided in the respective instruction booklet.
> and nothing is displayed on the LCD panel, the
Turn the < > to <
The battery level will be checked
automatically and the LCD panel will
then display one of the following
battery level icons:
: Battery level OK.
: Keep spare battery handy.
: Battery will soon be exhausted.
: Replace with new battery.
(→p.7)
> to <
> is turned on. To check the
> again.
>.
>. This will prevent