Canon EOS-1V HS Instructions Manual page 105

C.Fn-11 Focusing point selection method
This converts the <
can thereby position the focusing point selector according to your personal
preference. The <
vertical focusing point.
C.Fn Function
Focusing point
C.Fn-11
selection method
C.Fn-11-1: This reverses the functions of the <
Press the <
focusing point or turn the <
C.Fn-11-2: • While exposure metering is active, turn the <
horizontal focusing point (if C.Fn-13-3 has
been set, select a peripheral focusing point). To select a vertical
focusing point, hold down the <
The focusing point selection stops at the extreme left, extreme right, top-
most, and bottom-most focusing points. The above operations are also
possible while you press the shutter button halfway during AI Servo AF.
• During autofocusing, you can instantly switch to the automatic
focusing point selection mode by pressing the <
• You can also select the focusing point (including automatic focusing point
selection) by using C.Fn-11-1 operations.
• If both C.Fn-11-2 and C.Fn-18-1/2 (→109) have been set, select a
vertical focusing point by pressing the <
< > dial.
C.Fn-11-3: This reverses the functions of the <
the <
point or turn the <
> button or <
> dial can also be used to select a horizontal or
0
1
2
3
> button, then turn the <
> button, then turn the <
> dial to select a vertical focusing point.
Custom Function Settings
> button into the <
No.
↔
< > + <
< > + <
↔
< > + <
< > + <
↔
< > Stand-alone operation
< > + <
↔
< > + <
< > + <
> button and <
> dial to select a horizontal
> dial to select a vertical focusing point.
> button and turn the <
> button and turning the
> button and <
> dial to select a horizontal focusing
> button. You
Description
>
>
>
>
>
>
>
> button.
> dial to select a
> dial.
> button.
> button. Press
105