Canon EOS-1V HS Instructions Manual page 104

Custom Function Settings
C.Fn-9 AEB sequence and auto cancellation
You can alter the standard AEB sequence of correct exposure,
underexposure, and overexposure and prevent AEB cancellation after
changing the lens, reloading film, or turning off the Main Switch.
O: Correct exposure –: Underexposure +: Overexposure
C.Fn Function
AEB sequence/Auto
cancellation after
C.Fn-9 lens change, film
loading, or Main
Switch OFF
C.Fn-9-1: You can continue taking AEB shots in this sequence.
C.Fn-9-2: The AEB sequence progresses from the shortest exposure.
C.Fn-9-3: You can continue taking AEB shots in the same sequence
as with C.Fn-9-2.
C.Fn-10 Focusing point flashing mode
You can disable the in-focus flashing of the focusing point or make it
brighter for easier visibility in bright scenes.
C.Fn Function
Focusing point
C.Fn-10
flashing mode
C.Fn-10-1: The focusing point does not flash at all.
C.Fn-10-2: Prevents the dimmed flashing of C.Fn-10-0.
C.Fn-10-3: Effective when the focusing point flashing is difficult to see
with C.Fn-10-0.
104
No.
0 O, –, + / Enabled
1 O, –, + / Disabled
2 –, O, + / Enabled
3 –, O, + / Disabled
No.
0 Enabled
1 Disabled
2 Enabled (No dim flashing)
3 Bright flashing
Description
Description