Table of Contents
Advertisement
Paper and Media
2.
Wait for the tray to lower and stop.
Note:
When a conversion kit is installed, the door to Tray 6 is absent. Press the white button on the
right side of the door frame to lower and raise the paper tray.
3.
The control panel displays the paper tray settings. Ensure that you load the correct paper type into
the tray.
Note:
Do not load custom-size paper into Tray 6.
4.
Fan the edges of the paper before loading it into the paper trays. This procedure separates any
sheets of paper that are stuck together and reduces the possibility of paper jams.
Note:
To avoid paper jams and misfeeds, do not remove paper from its packaging until necessary.
5.
Load the paper against the right side of the tray:
Place letterhead or pre-printed paper face up with the top edge toward the front of the tray.
Place hole-punched paper with the holes toward the right side of the tray.
176
User Guide
B80XX Series Multifunction Printer
Advertisement
Table of Contents
Troubleshooting
