Xerox AltaLink B80 Series User Manual page 100

Xerox® Apps
Scan to Desktop
Before you begin:

Before scanning, ensure that your computer and the printer are plugged in, powered on, and
connected to an active network.

On your computer, ensure that you have the correct print driver software installed. For details, refer
to Installing the Software

On your computer, ensure that the printer is installed using WSD. For details, refer to
Printer as a Web Service on Devices

On your printer, ensure that WSD is enabled. For details, refer to Enabling WSD Scan Services.
To Scan to Desktop:
1. Load the original document on the document glass or into the duplex automatic document feeder.
2. At the printer control panel, press the Home button.
Touch Scan To.
3.
4. To select a destination, touch the computer address, then touch OK.
5. Adjust scanning options as needed.
6. To begin the scan, touch Scan.
The Windows Fax and Scan application opens on your PC desktop. The image file of your scan is
saved to the Scanned Documents folder.
7. If you are scanning from the document glass, when prompted, to finish, touch Done, or to scan
another page, touch Add Page.
Note: If you are scanning a document from the automatic document feeder, a prompt does not
appear.
8. To return to the Home screen, press the Home button.
100
User Guide
on page 51.
on page 56.
B80XX Series Multifunction Printer
Installing the