Setting The Search Conditions - Canon CR-1 MARK II Operation Manual

When the Warning screen is displayed
Check out the following when the Warning screen is displayed.
• Is the network operating properly?
• Is the server working properly?

7.5.5.3 Setting the search conditions

Take the steps below to set the default values of the Worklist Search screen (see page 20).
1
Click [Search Conditions...].
Search Conditions screen is displayed.
2 Set the Search Conditions : Date.
Select the date search condition, and input the condition.
Based on the input condition, studies with the Scheduled Procedure Step Start Date (0040,0002) or
Scheduled Procedure Step Start Time (0040,0003) are searched.
If no conditions have been input, the search conditions will not be set.
Item
Time
Range of Date
(MM/DD/YYYY)
Range of Days
The search is conducted using the range which has been set with the current
time serving as the reference.
Input a number from 1 to 24.
The search is conducted using a period extending from the start date to the
end date.
Select the dates in the range extending from 1/1/1870 to 12/31/9999.
The search is conducted using the range which has been set with the current
date serving as the reference.
Input a number below 999.
-89-
Operation
Continued on the following page >>
7. Settings