Saving Studies - Canon CR-1 MARK II Operation Manual

5.1.4 Saving studies

When study log data was temporarily saved in the database of the control software, each study can be
saved to a user-selected location.
Note: To save a study log data, access rights for the storage directory must be set.
For details, refer to (2) in 2.1 Software (see page 3).
1
Select the study.
On the Study Logs screen, select the study.
To select multiple studies, click the studies while holding down the Ctrl key on the keyboard. To
select a range of studies, click the studies while holding down the Shift key on the keyboard.
2
Save the study to a designated folder.
Click [Save]. The Browse For Folder screen is opened.
Set the folder where the study will be saved, and click [OK].
The study is saved.
To cancel saving
To cancel saving of the studies, click [Cancel].
Once [Cancel] is clicked, the saving of unsaved studies is aborted, but studies where saving was
completed or where saving was in progress are saved to the designated saving location.
Browse For Folder screen
Saving the study(ies) screen
-35-
5. Operations on study logs