Error - Canon CR-1 MARK II Operation Manual

8. Before calling the service technician (Error)

8.2 Error

module id message id
00005
00008
00011
10002
10003
10004
5 Specified User ID already exists.
Failed in DICOM communications. - a series of
8
operation with SCP
Failed in DICOM communications. - C-STORE-
10
RQ
Failed in DICOM communications. - C-STORE-
11
RSP
Failed in DICOM communications. - C-ECHO-
12
RQ
Failed in DICOM communications. - C-ECHO-
13
RSP
Failed in DICOM communications. - N-CREATE-
14
RQ
Failed in DICOM communications. - N-CREATE-
15
RSP
16 Failed in DICOM communications. - N-SET-RQ
17 Failed in DICOM communications. - N-SET-RSP
18 Failed in DICOM communications. - C-FIND-RQ
Failed in DICOM communications. - C-FIND-
19
RSP
Failed in DICOM communications. C-FIND
20
returned error status.
Failed in DICOM communications. - C-
21
CANCEL-RQ
1 Fail to open Omron Device.
2 Fail to close Omron Device.
101 Failed to connect to specified EOS.
2 Incorrect Entry of Date for Search Conditions
Insufficient Free Space in Storage Directory
29 No image can be captured.
[** GB]
Service cannot start.
Service name: MSDTC
3701
Display name: Distributed Transaction
Coordinator
4100 Error on Saving to External Storage
4103 Failed to read the external study.
A folder or file without access rights exists under
4106
the specified folder.
The path of the specified folder exceeds the
4107
maximum length.
Message
-112-
Detail
The User ID which has been input is already
registered. Change the User ID.
Check the MPPS tab (see page 91), Worklist tab
(see page 88) or storage settings (see page 92).
Check the storage settings (see page 92).
Check the MPPS tab (see page 91), Worklist tab
(see page 88) or storage settings (see page 92).
Check the MPPS tab (see page 91).
Check the Worklist tab (see page 88).
• Check that the OMRON device is connected
correctly.
• Check that the device number is assigned
correctly.
• Check that the driver is installed correctly.
Check the connection with the EOS digital camera.
Open the Search Screen (see page 32) from the
Study Logs screen, and then input the correct date.
No images can be taken since the free space on the
drive containing the storage directory is less than
1 GB.
Increase the amount of free space on the drive.
Set the startup type of the service to a setting other
than "Disable."
Check that the specfied saving destination can surely
save the study(ies).
Try to display the study log file again. If this fails,
the data may be corrupted. If the data is retained in
the Temporarily Saved, try saving again.
Select a folder again in the Browse For Folder
screen. Select the study logs file folder or a folder at
the nearest possible level.
Move the folder of the study logs file to a location
where the folder path is 150 characters or less. Click
[Folder], and specify the new folder location in the
Browse For Folder screen.