Canon CR-1 MARK II Operation Manual page 87

1
Perform the EOS settings.
Item
Model
Retinal Camera
Mode
Grayscale
Conversion
Image Format
Image Size
Image Quality
ISO Speed
Picture Style
2
Check the connection with the EOS.
Click [Connection Check...].
If the connections have been made properly, the Information screen is displayed.
When [OK] is clicked, the Information screen is closed.
When an Error screen has appeared
When an Error screen has appeared, check the following.
• Is the power of the retinal camera on?
• Is the power of the digital camera on?
• Are the retinal camera and computer connected by a cable?
• Are the digital camera and retinal camera connected by a cable?
3
Save the settings.
On the EOS screen, click [OK].
Click , and select the digital camera being used.
Color only can be selected.
Select Yes or No.
Select JPEG or RAW.
Select the image size.
The available image sizes vary depending on the image format and ISO
speed.
Select Fine or Normal.
The available image resolutions vary according to the image format.
Select the ISO speed.
Select 3200 (LOW1) or 1600 (LOW2) for the low flash intensity
photography.
Select Picture Style.
Information screen
-79-
Operation
7. Settings