Printing Images; Adjusting The Printing Parameters - Canon CR-1 MARK II Operation Manual

6. Main screen operations

6.7 Printing images

Images can be printed out using the 7.10 Print (see page 109) settings.
The available printing methods are simple printing and Easy-PhotoPrint EX.
Before printing the images, set the printing parameters.

6.7.1 Adjusting the printing parameters

Printing parameters for images can be adjusted.
The adjustment here are applied only when images are printed, and will not be applied to the parameters of
the images themselves.
When the parameters of the images themselves are to be changed, refer to 6.8 QA (see page 65).
1
Select the image.
Click the thumbnail image.
2
Display the Print Adjustment screen.
On the menu bar, click [File] > [Print Adjustment...] in this order.
3
Adjust the parameters.
The adjusted parameters are applied to all the images in the retinal camera mode which has been
selected.
Contrast
Brightness
Gamma
Hue (R)
Hue (G)
Hue (B)
Parameter
Any contrast level from -50 to 50 can be set.
Drag the slider or click
Any brightness level from -50 to 50 can be set.
Drag the slider or click
Any gamma level from -1.00 to 1.00 can be set.
Drag the slider or click
Any hue level from -50 to 50 can be set.
Drag the slider or click
Print Adjustment screen
Operation
or
or
or
or
-60-
.
.
.
.