Referencing The Image Properties - Canon CR-1 MARK II Operation Manual

2
Change the sequence in which the images are to be displayed.
When displaying the images in the sequence in which they were taken, click the By Time icon; when
displaying the images in the sequence of the left and right eyes, click the By R/L icon.
Turning display of the study information screen on and off
On the menu bar, click [View] > [Hide Study Information] to turn the display of the study
information screen on and off.
Turning display of rejected images (see page 67) on and off
On the menu bar, click [View] > [Hide Rejected Images] to turn the display of rejected images
on and off.

6.2.2 Referencing the image properties

When the main and thumbnail display has been selected, the properties of image can be referenced.
1
Select the main and thumbnail display.
Click the Main and Thumbnails icon.
2
Select the image.
Click the thumbnail image.
Main and thumbnail display
-45-
6. Main screen operations
Continued on the following page >>