Magnetic Card/Barcode Input - Canon CR-1 MARK II Operation Manual

4.2.3 Magnetic card/barcode input

Studies can be input from magnetic cards and barcodes.
Data and communication settings must be made for the magnetic card/barcode reader that is used.
For details, please contact a Canon representative or distributor.
This describes the input procedure after the magnetic card/barcode settings (see page 110) have been
made.
1 Display the Study Input screen.
Click the Study icon, or click [Study] > [Study F1] from the menu bar.
If a tab other than Mag Barcode Input is displayed, click the Mag Barcode Input tab.
Items that are set as Essential Data (see page 86) appear with the item name in blue.
When the Worklist search screen is displayed
If the Worklist search screen (see page 20) is displayed, click [Cancel].
Mag Barcode Input screen
-13-
4. Performing studies
Continued on the following page >>