Study Info. Tab - Canon CR-1 MARK II Operation Manual

7. Settings

7.9.3 Study Info. tab

On this tab, study information to be displayed at the right of the main screen is set.
The items displayed in Displayed Items appear in the study information at the right of the main
screen.
To add or delete a display item, select the item, and then click
To change the display sequence, select the item, and then click [Up] or [Down].
For the display items listed below, there are times when no information can be input or when the
display items themselves are subject to certain conditions.
Age
Study Status
MPPS Status
Study Input Type
Study Trans Status
Displayed Items
When a worklist is used, the values obtained by calculation from the
Patient Birth Date (0010,0030) in the acquired worklist are used. If,
however, there is no value for the Patient Birth Date, the value for
Patient's Age (0010,1010) in the worklist is used.
When the study has been input manually, the value obtained by
calculation from the birth date is used.
NONE, REGISTER, START, CANCEL or FINISH is displayed.
NONE, IN_PROGRESS, DISCONTINUED or COMPLETED is
displayed.
UNKNOWN, MANUAL, WORKLIST, SERIAL_READER or
STUDIX is displayed.
NONE, START, FINISH, ERROR or FATAL_ERROR is
displayed.
Study Info. tab
Display Description
-104-
or .