Safety Key Lock; Residual Heat Indicator - CDA HN6731FR Installation, Use And Maintenance Manual

Table of Contents

Advertisement

Safety Key Lock

To prevent accidental use, the hob has a safety key lock which
switches controls off temporarily or completely. The safety key lock
can be activated when the hob is turned on but not when power has
been switched off at, or the appliance disconnected from, the mains.
Disconnecting the appliance from the mains will deactivate the safety
key lock.
To switch on the lock, turn on the hob and then touch the front
right cooking zone indicator (5) and the booster function sensor (3)
simultaneously. Then touch the front right cooking zone indicator
once more. All cooking zone displays should show an 'L'.
To switch off the lock, switch on the hob if necessary and then touch
the front right cooking zone indicator (5) and the booster function
sensor (3) simultaneously. Then touch the booster function sensor (3)
again. The hob will switch off but when reactivated will be unlocked.

Residual Heat Indicator

The hob is equipped with residual heat indicators to warn when any
of the zones are still hot to the touch after use. An " " will show in
a zone's indicator if the relevant zone is above 45°c. You should
avoid touching any zone whilst the hob is in use or whilst residual
heat indicators are displayed. In the event of a power cut or failure,
the residual heat indicators will illuminate after the power supply is
restored. When there is no power supply to the hob however the
residual heat indicators will not work, yet the hob zone(s) may still be
hot, so extra care must be taken.
17

Advertisement

Table of Contents
loading

Table of Contents