Residual Heat Indicator - CDA Matrix MHN101FR User Manual

Please note: Disconnecting the appliance from the mains will
deactivate the safety key lock.
To activate the safety key lock
To switch on the lock, turn on the hob and touch the safety key lock
sensor (11) for approximately 5 seconds. The safety key lock indicator
light (13) should illuminate.
To deactivate the safety key lock
To switch off the lock, touch the safety key lock sensor (11) for
approximately 5 seconds. The safety key lock indicator light (13)
should extinguish.

Residual Heat Indicator

The hob is equipped with residual heat indicators to warn when any
of the zones are still hot to the touch after use. An " " will show in a
zone's indicator if the relevant zone is between 45°c and 60°c. An "
" will show if the relevant zone is 60°c or above. You should avoid
touching any zone whilst the hob is in use or whilst either residual
heat indicator is displayed.
In the event of a power cut or failure, the residual heat indicators will
illuminate after the power supply is restored. When there is no power
supply to the hob however the residual heat indicators will not work,
yet the hob zone(s) may still be hot, so extra care must be taken.
15