Table of Contents
Advertisement
Pause Function
The hob is equipped with a pause function that allows the user to
suspend the hob's operation for a brief period of time and to easily
continue cooking when convenient from the previously assigned
settings. This is particularly useful when your attention is drawn from
the hob, i.e. answering the door.
To activate the pause function
•
At least one hob zone must be active. Press the 'pause function
sensor' (8). All cooking zone indicators will show a pause symbol (II)
and the pause function sensor LED will illuminate.
To deactivate the pause function and resume cooking
•
Press the pause function sensor (11) so that the Pause function LED
goes out. Then, using the back right cooking zone's heat setting
slider sensor (12), touch position '0' on the slider (the left-most
position) and then slide your finger along the sensor to the right
to heat setting '9'. The hob should then resume cooking as it was
before the pause function was activated.
Please note: The pause function can only be used for a maximum of
10 minutes. If the hob is not reactivated within this time then the hob
switches itself off.
The pause sensor can be used to restore the last-set cooking settings
if the on/off sensor (9) is accidentally activated and the hob switched
off during use. Simply switch the hob back on using the on/off sensor
(9) and press the pause function sensor (8). This feature is only
14
Advertisement
Table of Contents
