Pause Function - CDA HN9611FR Installation, Use And Maintenance Manual

Induction hob
Table of Contents

Advertisement

To set the minute minder
Switch the hob on using the on/off sensor (1) if necessary.
Touch the timer "+" and "-" sensors (5 and 6) simultaneously to
activate the minute minder. The LED immediately below the timer
display should flash. This is the minute minder LED.
Use the timer "+" sensor (5) or the timer "-" sensor (6) to set
the desired time in minutes.
After approximately 10 seconds the hob will beep to confirm the
time has been set and the countdown will begin.
To cancel the minute minder
Follow the steps for setting the minute minder but set the time to 0.
After approximately 10 seconds the timer display will extinguish.

Pause Function

The hob is equipped with a pause function that allows the user to
suspend the hob's operation for a brief period of time and to easily
continue cooking when convenient from the previously assigned
settings. This is particularly useful when your attention is drawn from
the hob, i.e. answering the door.
To activate the pause function
At least one hob zone must be active. Press the pause function
sensor (11). All cooking zone indicators will show a pause symbol (II)
and the pause function sensor LED will illuminate.
To deactivate the pause function and resume cooking
Press the pause function sensor (11) so that the Pause function LED
14

Advertisement

Table of Contents
loading

Table of Contents