Agilent Technologies InfinityLab LC Series User Manual page 254

11 Hardware Information
Interfaces
Table 20 Agilent InfinityLab LC Series Interfaces
Module
Fraction Collectors
G7158B
G7159B
G7166A
G1364E/F, G5664B
Others
G7116A/B
G7122A
G7170B
The detector (DAD/MWD/FLD/VWD/RID) is the preferred access point for
NOTE
control via LAN. The inter-module communication is done via CAN.
•
•
•
•
•
•
1290 Infinity II High-Speed Pumps User Manual
CAN USB
2 Yes
2 Yes
2 No
2 Yes
2 No
No No
2 No
CAN connectors as interface to other modules
LAN connector as interface to the control software
RS-232C as interface to a computer
USB (Universal Series Bus) as interface to a computer
REMOTE connector as interface to other Agilent products
Analog output connector(s) for signal output
LAN RS-232 Analog APG (A)
(on-board)
Yes No No
Yes No No
No No No
Yes No No
No No No
No Yes No
No No No
Special
/ ERI (E)
E
E
No Requires a host module
with on-board LAN with
minimum FW B.06.40 or
C.06.40, or with addi-
tional G1369C LAN Card
E THERMOSTAT for
G1330B
No Requires a host module
with on-board LAN or
with additional G1369C
LAN Card.
A
No Requires a host module
with on-board LAN with
minimum FW B.06.40 or
C.06.40, or with addi-
tional G1369C LAN Card
254