Laser Safety; North America; Europe Eu - Xerox Nuvera 100 Getting Started Manual

Safety and Notices

Laser Safety

North America

This product complies with safety standards and is certified as a Class 1 Laser product under
the Center for Devices and Radiological Health (CDRH) of the United States Food and Drug
Administration (FDA) implemented regulations for laser products. This product complies with
FDA performance standards for laser products except for deviations pursuant to Laser Notice
No. 50, dated June 24, 2007. These regulations apply to laser products marketed in the United
States. The label on the machine indicates compliance with CDRH regulations and must be
attached to laser products marketed in the United States. This product does not emit
hazardous laser radiation.
WARNING
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous exposure of laser light.
Since radiation emitted inside this product is completely confined within the protective
housing and external covers, the laser beam cannot escape from the machine during any
phase of the user operation.
This product contains laser-warning labels. These labels are intended for use by the Xerox
Service Representative and are placed on or near panels or shields that require special tools for
removal. Do not remove any of the panels. There are no operator serviceable areas in these
covers.

Europe EU

This product complies with IEC's safety standard 60825-1 (Edition 1.2) issued August 2001.
The equipment complies with laser product performance standards set by governmental,
national, and international agencies as a Class 1 Laser Product. It does not emit hazardous
radiation, as the beam is totally enclosed during all phases of customer operation and
maintenance.
WARNING
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
This product contains laser-warning labels. These labels are intended for use by the Xerox
Service Representative and are placed on or near panels or shields that require special tools for
removal. Do not remove any of the panels. There are no operator serviceable areas inside
these covers.
If you need additional safety information concerning the product or Xerox supplied materials,
you may call the following number:
+44 (0) 1707 353434
xii
Xerox Nuvera
Getting Started Guide