Product Identification; Pipework Positions And Flue Outlet - Worcester Greenstar 4000 Installation And Maintenance Instructions Manual

3.4

Product identification

Data plate
The data plate includes the product performance information, approval
data and serial number. The data plate location can be found in the
product overview.
Additional type plate
The product name and the most important product data are shown on
the additional data plate. The additional type plate can be found on the
outside of the product in an easily accessible location.
The additional type plate can be found on the underside of the appliance.
3.5

Pipework positions and flue outlet

2
1 3
Fig. 2 Pipe and flue outlet dimensions
Description
X Appliance width
Y Appliance height
Z Appliance depth
W Flue centre from appliance left side
D Flue centre from rear of appliance
1) 724mm to middle of top panel.
710mm side panel height.
Bottom panel is removable and not part of minimum clearance height
requirements.
Table 3 Appliance and flue outlet dimensions
Greenstar 4000 – 6 720 891 161 (2020/09)
4
6
7
5
0010023464-001
Dimensions (mm)
400
1)
724
310
200
135
# Function From left
case edge
1 Condensate Outlet 38mm
2 CH Flow 70mm
3 DHW Outlet 135mm
4 Gas 200mm
5 DCW Inlet 265mm
6 PRV Discharge 296mm
7 CH Return 330mm
Table 4 Pipe dimensions
Product Information
Diameter of pipe
22mm
• Rubber push fit connection
22mm
• Compression fitting
15mm
• Compression fitting
22mm
• Compression fitting
15mm
• Compression fitting
15mm
• Fittings not supplied
22mm
• Compression fitting
9