Appliance Type Overview; Product Identification; Pipe Work Positions And Flue Outlet - Worcester Greenstar 2000 Installation And Maintenance Instructions Manual

3.3

Appliance type overview

These appliances are for use with:
• Natural Gas or LPG (Cat.II 2H3P type C13, C33 & C53)
This document refers to the following appliance types:
Appliance type
GR2300iW 25 C NG 7 736 902 099
GR2300iW 30 C NG 7 736 902 100
GR2300iW 25 C LPG 7736 902 101
GR2300iW 30 C LPG 7736 902 102
Table 2 Type overview
The name of the appliance consists of the following parts:
• GR2300iW: Type name
• 25 or 30: Hot water output in kW
• C: Combi appliance
• NG: Gas type (Natural Gas)
• LPG: Gas type (Liquid Petroleum Gas)
3.4

Product identification

Data plate
The data plate includes the product performance information, approval
data and serial number. The data plate location can be found in the
product overview.
Additional type plate
The product name and the most important product data are shown on
the additional data plate. The additional type plate can be found on the
outside of the product in an easily accessible location.
3.5

Pipe work positions and flue outlet

3
2
4
1
Fig. 2 Pipe and flue outlet dimensions
Greenstar 2000 – 6 721 820 552 (2021/02)
Part number Gas Council number
47-800-26
47-800-28
47-800-27
47-800-29
7
6
5
0010029389-001
Description
X Appliance width
Y Appliance height
Z Appliance depth
W Flue centre from appliance left side
D Flue centre from rear of appliance
1) Side panel height = 710mm
Table 3 Appliance and flue outlet dimensions
# Function From left
case edge
1 Condensate Outlet 60mm
2 CH Flow 68mm
3 DHW Outlet 133mm
4 PRV Discharge 172.5mm
5 Gas 200mm
6 DCW Inlet 267mm
7 CH Return 332mm
Table 4 Pipe dimensions
For servicing purposes, keep condensate and pressure release valve
discharge pipes away from other hydraulic components.
Product Information
Dimensions (mm)
400
1)
724
300
200
125
Diameter of pipe
22mm
• Rubber push fit connection
22mm
• Compression fitting (via
adaptor)
15mm
• Compression fitting (via
adaptor)
15mm
• Push-fit fitting (via adaptor)
22mm
• Compression fitting (via
adaptor)
15mm
• Compression fitting (via
adaptor)
22mm
• Compression fitting (via
adaptor)
9