Table of Contents
Advertisement
Settings via software (sewing automat)
Instruction manual 550-532 - 00.0 - 07/2015
7.13 Saving seam pattern sequences
In addition to the seam patterns stored in memory locations
P1 ~ P50, the sewing automat also allows the use of seam pat-
terns stored in memory locations C01 ~ C25.
Prerequisite:
• Machine is in programming mode, Ready key LED is off.
1.
Press the Memory key and key P3 at the same time.
2.
Press the +/- Program keys to select a memory location
(C01 ~ C25).
3.
Press the Ready key to save the seam pattern sequence.
4.
Press the +/- Function keys to select the 1st seam pattern.
5.
Press the +/- Program keys to select the 2nd seam pattern.
6.
Press the +/- Function keys to select the 3rd seam pattern.
7.
Press the +/- Program keys to select the 4th seam pattern,
etc.
8.
Press the Ready key to confirm the seam pattern sequence.
The Program shows the memory location, the Function
display shows the number of seam patterns.
9.
Press the Memory key to exit the memory mode.
7.14 Sewing with a seam pattern sequence
Prerequisite:
• Machine is in programming mode, Ready key LED is off.
1.
Press the +/- Function keys to select a seam pattern.
2.
Press the Ready key to confirm the seam pattern sequence.
The Program display shows the seam pattern sequence,
e.g. <1.1>,
The Function display shows the seam pattern number.
3.
Briefly press the pedal fully forwards.
53
Advertisement
Table of Contents
