Replacing The Centre Belt - Husqvarna Rider PR 17 Workshop Manual

7. Hook the spring on the belt tensioner.

Replacing the Centre Belt

8. Remove the hose holder in the middle
(PR 17 and PF 21) and the rear belt
guide for the centre belt (all machine
types).
9. Remove the centre belt and mount a new
belt.
Fit and adjust the belt guide with the
lower belt on the engine belt pulley.
10. Fit the hose holder on PR 17 and PF 21
Check and adjust the belt tensioner. This
is especially important when fitting a new
belt.
REPAIR INSTRUCTIONS
Belt tensioner spring
77
English-