Husqvarna Rider PR 17 Workshop Manual page 78

Assembly
1. Pull the pump belt through the opening
under the pivot bearing and on the
outside past the belt tensioner's disc.
2. Fit the pump belt on the engine's pulley,
move it under the engine belt pulleys.
3. Fit the belt on the pump's pulley.
4. Fit the cooling fan.
5. Check that the centre belt is fitted
correctly on its front pulley and fit the
centre belt on the engine's pulley.
6. Fit the belt guide for the centre belt.
76
English-
REPAIR INSTRUCTIONS
Pump belt under the engine belt pulley
Assembling the cooling fan
Belt guide