Husqvarna Rider PR 17 Workshop Manual page 20

DELIVERY AND DEALER SERVICE
Maintenance
Clean around all belts, belt pulleys,
etc.
Lubricate the belt adjuster (nipple)
Lubricate the seat adjuster
Lubricate all cables
Lubricate the safety catch in the
cutting unit
Lubricate the interior plug in the
cutting unit
Lubricate the groove for the cutting
unit's equipment frame
Lubricate joints in the cutting unit
Clean inside the frame tunnel
Lubricate the pedal mechanism in
the frame tunnel
Lubricate the parking brake cable
Lubricate the throttle.
Lubricate the choke control.
Lubricate the guide chain in the
frame tunnel
Check the steering cables in the
frame tunnel
Clean the engine's cooling air
intake.
Clean the air filter's pre-cleaner
Change the engine oil
Clean the air cleaner's filter
2)
cartridge (paper filter).
Check/adjust the cutting height.
Check/adjust the parking brake.
Inspect the flame proofing/spark
arrestor (extra equipment).
Check the mounting bolts on the
muffler.
Replace the engine oil filter
(every 200 hours).
Replace the hydraulic oil filter
(every 200 hours).
Clean/replace the spark plugs.
Change the inline fuel filter.
Clean the cooling fins.
18
English-
Page
mainte-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
42
-
-
1 41
).
-
87
45
-
26
-
112
-
-
-
Daily Daily Weekly
mainte- mainte-
nance nance
nance
before after
At Maintenance
least interval in hours
once a
3)
year
25 50
l
100 300