Husqvarna Rider PR 17 Workshop Manual page 77

4. Pull off the centre belt from the engine's
pulley and pull out the rear section.
5. Remove the nut on the cooling fan.
Counter hold using a punch in one of the
holes on the underside of the fan when
the nut is loosened.
6. Pull the pump belt off of the pump's
pulley.
7. Pull the pump belt off of the engine's
pulley and move it under the engine belt
pulleys.
8. Pull out the pump belt through the
opening under the pivot bearing and past
the belt tensioner's disc.
REPAIR INSTRUCTIONS
Rear part of the front belt
Pump belt under the engine belt pulley
75
English-