Ring Tone Selection - TCS Carus Adapto Instruction Manual

Ring tones can be adju-
sted for four different call
types.
Thus, it is possilbe to
distinguish calls from
two different front-door
stations, a fl oor call or an
internal call.
You can choose between
13 different ring tones.
Proceed as follows:
1. Activate the ring tone
selection
End an eventually exisitng
conversation. Press the call
OFF-button for at least 8
seconds.
An acknowledgement
tone sounds.
2. Select a door ring tone
a... from the (fi rst)
front-door station
Press the door release
button until the desired
ring tone sounds.
The ring tone selected last
will be stored.
b ... from the second
front-door station*
Press the speech button
until the desired ring
tone sounds. The ring tone
selected last will be stored.
* If no seperate ring tone is selected, the
ring tone of the fi rst front-door station is
stored automatically.
c... from the fl oor door
Press the light switch button
until the desired ring
tone sounds. The ring tone
selected last will be stored.

Ring tone selection

d... from another indoor
station
Press the function key
until the desired ring tone
sounds. The ring tone se-
lected last will be stored.
3. Deactivate the ring tone
selection
To end the ring tone selec-
tion shortly press the call
OFF button once.
When no button is pressed
within the next 8 seconds,
the device ends the ring
tone selection automatically.
The ring tone selection ends
with an acoustic signal.
5