Led Indication; Indication And Operating Elements - TCS Carus Adapto Instruction Manual

LED indication

• •
Green LED is on
•
incoming door or
internal call
•
active voice connection
•
activated additional
functions
Confi gurable functions, see page 6.
• •
Red LED 1 is on
•
Ring tone mute is acti-
vated, an incoming call
is signalled not acousti-
cally
• •
Red LED 1 blinks
•
busy speech channel
• •
Red LED 2 is on
•
incoming door call
•
incoming internal call
•
call diversion activated
•
incoming control
function from sensor
•
send alternately two
control functions with a
unique serial number
A ring tone signals an inco-
ming call.
The green LED is on.
Speaking
Shortly press the speech
button to accept the call
or longer than 1 second to
switch-over to simplex com-
munication during an active
voice connection.
The green LED is on.
Shortly press the speech
button again or the door
release button to end the
conversation (the call is ter-
minated after 4 seconds).
Automatic call cut-off after
2 minutes.
Door release
Shortly press the blue door
release button.

Indication and operating elements

Switching lights
Shortly press the light switch
button.
Internal calls / Activate
additional functions
Press the function key to call
another indoor station or to
(de-)activate the call diver-
sion resp. the door release
automatic.
Confi guration necessary, see page 5.
Ring tone mute
Press the call OFF-button. In
case of an incoming call no
acoustic signal sounds.
The red LED is on.
Function keys 1 - 10
Press one of these buttons
for a specifi c connection to
a front-door, specifi c internal
calling, indication of staus
information, call diversion,
sending a control function
or sending 2 control func-
tions alternately.
Confi guration necessary, see
page 8-11.
3