TCS Carus Adapto Instruction Manual page 13

Function
Specifi c internal calls
10
Each function key of the comfort keypad can be programmed for any indoor station as
destination device for the internal calling.
In case of an incoming call:
•
The LED next to the function key blinks slowly.
Speaking:
•
Press the speech button, a voice connection to the calling indoor station is established.
•
The LED is on permanently.
End the call:
•
Press the speech button, the call OFF-button or the door release button (the call ends
after 4 seconds or automatically after 2 minutes).
•
The LED expires.
In case of another incoming internal call:
•
If there is a second call from an indoor station during a voice connection or after an
incoming call from an indoor station, also the LED next to the function key blinks, to
which the function internal call of another indoor station was programmed.
•
A voice connection to this indoor station can be established also up to 2 minutes after
the call came in (as long as the LED blinks).
Call an indoor station internally:
•
Press the function key, which is allocated to the second indoor station.
•
The LED blinks fast.
•
If the call is accepted at the called indoor station, a voice connection is established.
Operating the function keys 1 - 10