Settings Osd Menu; Setting Ring Tone Volume And Ring Tones - TCS IVW2211-0218 Instruction Manual

SETTINGS OSD MENU

Settings for ring tone volume and ring tones
Adjust the ring tone volume and select a required
ring tone in the OSD menu.
The device must be in standby mode
(speaking and video off).
1. Shortly press the Menu button to open the
main menu.
1
4
1
Symbol main menu
2
Navigation and operating
notes
2. Select the menu Ring tone parameter with the
navigation buttons UP or DOWN.
3. Confirm your selection by pressing the Menu
button again. The menu Ring tone parameter is
called up.
1
4
1 Active menu
2 Navigation and operating
notes
2
OK ESC
3
3
Selected menu
4
Menus
2
OK ESC
3
3
Adjusted value for selected
parameter
4
Parameter
Symbols ring tone parameter:
1 2
1 2
3 4
Ring tone volume
Ring tone selection for door calls
Ring tone selection for floor calls
Ring tone selection for internal calls
Ring tone selection for sub ring tones
EN
19