Fortinet FortiWiFi FortiWiFi-60B Install Manual page 53

Using a wireless network
4
5
6
FortiWiFi-60B FortiOS 3.0 MR6 Install Guide
01-30006-0447-20080131
Configure the following settings and select OK:
Interface/Zone Source WLAN
Interface/Zone Internal
Destination
Address Name Source All
Address Name All
Destination
Schedule Always
Service ANY
Action ACCEPT
NAT Enable
Protection Profile This setting is optional, depending on the scanning or access
point hardware you are using.
Next, create an outgoing firewall policy that allows traffic from the local users
through to the wireless network port so network users can send data to the
external network and the Internet.
To create and incoming firewall policy
Go to Firewall > Policy.
Select the blue arrow for Internal to WLAN.
Select Create New.
Configure the following settings and select OK:
Interface/Zone Source Internal
Interface/Zone WLAN
Destination
Address Name Source All
Address Name All
Destination
Schedule Always
Service ANY
Action ACCEPT
NAT Enable
Protection Profile This setting is optional, depending on the scanning or access
point hardware you are using.
Setting up the FortiWiFi unit as a client
53