Reverting To A Previous Version - Fortinet FortiWiFi FortiWiFi-60B Install Manual

Using the web-based manager

Reverting to a previous version

66
To upgrade the firmware
1 Download the firmware image file to your management computer.
2 Log into the web-based manager as the admin administrative user.
3 Go to System > Status.
4 Under System Information > Firmware Version, select Update.
5 Type the path and filename of the firmware image file, or select Browse and locate
the file.
6 Select OK.
The FortiWiFi unit uploads the firmware image file, upgrades to the new firmware
version, restarts, and displays the FortiWiFi login. This process takes a few
minutes.
The following procedures revert the FortiWiFi unit to its factory default
configuration and deletes IPS custom signatures, web content lists, email filtering
lists, and changes to replacement messages.
Before beginning this procedures, it is recommended that you back up the
FortiWiFi unit configuration.
If you are reverting to a previous FortiOS version, you might not be able to restore
the previous configuration from the backup configuration file.
Note: Installing firmware replaces the current antivirus and attack definitions, along with the
definitions included with the firmware release you are installing. After you install new
firmware, make sure that antivirus and attack definitions are up to date. For details, see the
FortiGate Administration Guide.
Note: To use this procedure, you must log in using the admin administrator account, or an
administrator account that has system configuration read and write privileges.
To revert to a previous firmware version
1 Copy the firmware image file to the management computer.
2 Log into the FortiWiFi web-based manager.
3 Go to System > Status.
4 Under System Information > Firmware Version, select Update.
5 Type the path and filename of the firmware image file, or select Browse and locate
the file.
6 Select OK.
The FortiWiFi unit uploads the firmware image file, reverts to the old firmware
version, resets the configuration, restarts, and displays the FortiWiFi login. This
process takes a few minutes.
7 Log into the web-based manager.
8 Restore your configuration.
For information about restoring your configuration see
on page 32.
FortiWiFi Firmware
"Restoring a configuration"
FortiWiFi-60B FortiOS 3.0 MR6 Install Guide
01-30006-0447-20080131